Connecting peripherals to the server 47
Connecting peripherals to the server
Rear panel connectors
Note: The above diagram shows the power switch and power input for an AC server. The rest of the diagram is the same for AC or DC servers. For peripheral device connections, this picture applies to AC and DC servers.
To connect the mouse, keyboard, and monitor to the server
Step Action
1Place the monitor, keyboard, and mouse in the same location as the server.
Nortel CallPilot
1002rp Server Hardware Installation
5.0 23 February 2007
Copyright © 2007, Nortel Networks | Nortel Networks Confidential |
