3.3.8Space Rack
(1)Remove the printhead (see 3.3.1).
(2)Remove the upper cover (see 3.3.4 (1) – (5)).
(3)Remove the gear case Assy (see 3.3.5).
(4)Remove the space motor (see 3.3.7).
(5)Remove the spring 1.
(6)Disengage the claw on left side of space rack 2 from the frame, and remove the space rack 2 in upper direction.
(7)To install, follow the removal steps in the reverse order.
Note on installation:
(1)After installation, check and adjust the gap between platen and printhead (see
1
2
1
2
2
3 – 12
