3.3.18Carriage Shaft
(1)Remove the printhead (see 3.3.1).
(2)Remove the upper cover (see 3.3.4 (1) – (5)).
(3)Remove the driver board (see 3.3.12). Remove the FG plate (L) 2.
(4)Slide the carriage shaft 1 to the left side (in the direction of the arrow) to remove.
(5)To perform mounting, follow the reverse procedure of removal.
Note on installation:
(1)After installation, check and adjust the gap between platen and printhead (see
1
2
3 – 22
