3.3.20Rear Tractor Assy
(1)Remove the printhead (see 3.3.1).
(2)Remove the ribbon protector (see 3.3.2).
(3)Remove the
(4)Remove the upper cover (see 3.3.4 (1) – (5)).
(5)Remove the reset spring (see 3.3.17 (3))
(6)Remove the tractor gear 1.
(7)Shift the drive shaft 2 to the right side to remove (in the direction of the arrow).
(8)To perform mounting, follow the reverse procedure of removal.
Remark on assembly:
(1)When the Tractor Assy (L) 3 (R) 4 have been detached from the Drive Shaft, align the protrusions 5 of the Pin Tractor Wheels to the same direction before assembly.
5
4 2
3
1
3 – 24
