3.3.12Driver Board (SDDV)
(1)Remove the upper cover (see 3.3.4 (1) – (5)).
(2)Remove two screws 1, and release the driver board 2 and PCB sheet 5 by lifting clamp
4.
(3)Disconnect all cables from driver board 2.
(4)To install, follow the removal steps in the reverse order.
Note on installation:
(1)Insert one sensor lever 3 between sensor when installing the driver board 2.
2 4
4
5
1
Sensor
1 |
| 2 |
| 2 | 3 |
|
|
3
3 – 16
