Palm Zire 31 manual Synchronizing over a network, Synchronizing by dialing in to a network

CHAPTER 5 Synchronizing Your Handheld with Your Computer

[ ! ] Before You Begin

The following setup must be done before you can synchronize over a network:

•Your computer must have TCP/IP installed.

•Your company’s network system and its remote access server must support TCP/IP.

•You must have a remote access account.

Check with your system administrator for assistance.

To synchronize by dialing in to a network, you must also have a mobile phone (sold separately) that you can use as a modem to dial in to the network, or an attachable modem accessory (sold separately).

Synchronizing over a network

WINDOWS ONLY

You can synchronize over your company’s network by dialing in to a network or by connecting to any computer on the network using a cable or your handheld’s IR port. Use network synchronization if you are not close enough to your computer to synchronize directly using a cable or the IR port.

[ ! ] IMPORTANT The first time you synchronize, you must use the cable or infrared communication. After that, you can synchronize over a network.

Synchronizing by dialing in to a network

1	Prepare your computer for network synchronization:
	a. Click the HotSync Manager icon	in the taskbar in the lower-right corner of
	your screen.
	b. Select Network.

c. Click the HotSync Manager icon again, and then select Setup.

Continued

Zire™ 31 Handheld 78