Palm manual Doing a hard reset, Done Zire 31 Handheld

CHAPTER 22 Maintaining Your Handheld

Doing a hard reset

Only do a hard reset if a soft reset doesn’t solve your problem, or if you want to clear all of your information from your handheld.

[ ! ] IMPORTANT A hard reset deletes all records and entries stored on your handheld, including the username that identifies the handheld. Before you do a hard reset, be sure to synchronize.

1

2

3

4

Press and hold the power button.

While holding the power button, use the tip of an unfolded paper clip (or a similar object without a sharp tip) to gently press and release the reset button inside the hole on the back of your handheld.

Wait for the Palm Powered™ logo to appear, then release the power button.

When you see the message that warns you about erasing all of the info on your handheld, do one of the following:

•Press Up on the navigator to finish the reset and show the Digitizer screen.

•Press any other button to do a soft reset.

Done

Zire™ 31 Handheld 350