Palm Zire 31 manual Resetting your handheld, Handheld don’ts, Doing a soft reset

CHAPTER 22 Maintaining Your Handheld

•Use only 3.5 mm stereo headphones in your handheld’s headphone jack.

•Be sure to get rid of any static electricity buildup before you connect your handheld to any cable or accessory.

Handheld don’ts

•Do not drop, bang, or otherwise cause a strong impact to your handheld.

•Do not carry your handheld in your back pocket; you might sit on it by mistake.

•Do not let your handheld get wet; don’t even leave it in a damp location.

•Do not expose your handheld to very hot or cold temperatures, including placing it near a heater, leaving it in a car, or setting it by a window in direct sunlight.

Resetting your handheld

On rare occasions your handheld may not respond when you press a button or tap the screen. In this case, you need to reset your handheld.

Doing a soft reset

A soft reset tells your handheld to stop what it’s doing and start over again. None of your information will be lost. After a soft reset, a screen appears that lets you reset the date and time, if needed.

To do a soft reset, use the tip of an unfolded paper clip (or similar object without a sharp tip) to gently press the reset button inside the hole on the back panel of your handheld.

Zire™ 31 Handheld 348