Selecting ALL SLOT will result in a batch export of all cards.
Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
Select the number of the source P2 card slot and press the SET button.
7
select [YES] and press the SET button. This starts hard disk formatting.
Exporting to a Hard Disk in Card Units
When the confirmation message appears again,
7

A TYPE S hard disk allows you to export data to a hard disk

8 Select [YES] and press the SET button.

(by writing data from a P2 card to a hard disk) in P2 card units.

 

This starts exporting.

First use this unit to format the hard disk. Up to 23 cards can

 

 

 

 

 

be exported to a hard disk.

 

◆ NOTE:

The exported data from a P2 card is recognized as a separate

 

• A progress bar appears during exporting.

drive on a computer.

 

• To interrupt exporting, press the SET button, select [YES] in the

 

cancel confirmation screen and press the SET button again.

1 Switch to the USB host mode.

 

 

• The export operation will end earlier if the verify setting is not

 

engaged.

2 Connect a USB hard disk.

 

To turn off this setting, choose [HDD] – [SETUP] – [VERIFY] –

 

[OFF].

 

• Copying of a P2 card that is interrupted during verification will

If the hard disk has not been formatted by this unit, use this

 

 

still be successful.

unit to format it.

 

 

• To export data to the specified folder when the hard disk is

➝For details, refer to “Formatting Hard Disks” (page 99).

 

 

connected to a PC running under Windows, use the drive mount

3 Insert a P2 card

 

converter that you can download freely from the following web

 

site. You may use the drive mount converter when there is un

 

invisible partition because the drive overlaps an already

4 Open the thumbnail screen.

 

 

assinged network.

 

https://eww.pavc.panasonic.co.jp/pro-av/

5 Press the MENU button.

 

When the export operation ends, “COPY COMPLETED!”

6 Use the cursor buttons to choose [HDD] –

 

appears.

 

 

[EXPORT].

 

 

100