| Item | Setting |
| |
|
|
|
| Settings and brief function description |
FR | SUPER | FR | SUPER | |
No. | DISP. | No. | DISP. |
|
|
|
|
|
|
|
| 0000 | REC | Specifies an operating mode that advances the internal time code generator. |
504 | RUN MODE | 0001 | FREE | 0: The internal time code generator is advanced only during recording. |
|
| 1: When the power is on, the internal time code generator is advanced regardless of | ||
|
|
|
| |
|
|
|
| operating mode. |
|
|
|
|
|
|
| 0000 | TC&UB | Specifies the signal to regenerate when the time code generator (TCG) is in the REGEN |
|
| 0001 | TC | mode. |
505 | TCG REGEN | 0002 | UB | 0: Regenerates both the time code and the user bit |
|
|
|
| 1: Regenerates only the time code |
|
|
|
| 2: Regenerates only the user bit |
|
|
|
|
|
|
| 0001 | EXT_L | Specifies the time code used when an external time code is used. |
|
| 0002 | SLTC | 0: LTC of the TIME CODE IN connector |
|
| 0003 | SVITC | 1: LTC data attached to serial signal input to HD SDI IN |
507 | EXT TC SEL |
|
| 2: VITC data attached to serial signal input to HD SDI IN |
|
| NOTE: | ||
|
|
|
| |
|
|
|
| When SLTC and SVITC are set, the VITC in the input video signal is used when an analog |
|
|
|
| composite or SD SDI input signal is selected. When 1394 is selected as the input signal, |
|
|
|
| the IEEE 1394 digital input signal time code is used regardless of this setting. |
|
|
|
|
|
|
| 0000 | 000 | Specifies user bit usage in time code generated by the TCG. |
|
| 0001 | 001 | 0: NOT SPECIFIED (character set not specified) |
|
| 0002 | 010 | 1: ISO CHARACTER |
|
| 0003 | 011 | 2: UNASSIGNED 1 (undefined) |
508 | BINARY GP | 0004 | 100 | 3: UNASSIGNED 2 (undefined) |
|
| 0005 | 101 | 4: UNASSIGNED 3 (undefined) |
|
| 0006 | 110 | 5: PAGE/LINE |
|
| 0007 | 111 | 6: UNASSIGNED 4 (undefined) |
|
|
|
| 7: UNASSIGNED 5 (undefined) |
|
|
|
|
|
|
| 0000 | OFF | Specifies whether or not LTC output from the TIME CODE OUT connector should be phase |
509 | PHASE CORR | 0001 | ON | controlled. |
|
| 0: No phase control | ||
|
|
|
| |
|
|
|
| 1: Phase controlled |
|
|
|
|
|
|
| 0000 | OFF | Sets the TCG CF flag. |
510 | TCG CF FLAG | 0001 | ON | 0: OFF |
|
|
|
| 1: ON |
|
|
|
|
|
|
| 0000 | DF | Sets the DF or NDF mode for CTL and TCG. |
|
| 0001 | NDF | 0: Uses drop frame mode. |
511 | DF MODE |
|
| 1: Uses |
|
|
|
| NOTE: |
|
|
|
| This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ. |
|
|
|
|
|
|
| 0000 | VOUT | Specifies how the phase is switched for the time code output by the TIME CODE OUT |
|
| 0001 | TC_IN | connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE |
512 | TC OUT REF |
|
| mode) |
|
|
|
| 0: Synchronized with output video signal. |
|
|
|
| 1: Synchronized with the external time code input. |
|
|
|
|
|
|
| 0000 | SBC | Specifies how to output VITC that will be superimposed on the SD output video signal. |
|
| 0001 | VAUX | 0: Outputs the time code recorded in the SBC area as VITC |
|
|
|
| 1: Outputs the time code recorded in the VAUX area as VITC |
|
|
|
| NOTE: |
513 | VITC OUT |
|
| • VITC data detected in the input video signal is automatically recorded in the VAUX area |
|
|
|
| during video recording. |
|
|
|
| • When CMPST and SDI are selected as input signals, VITC, which is output during |
|
|
|
| recording, outputs a time code that is superimposed on the input signal regardless of |
|
|
|
| above settings. |
|
|
|
|
|
|
| 0000 | OFF | Specifies whether or not VITC data will be superimposed on HD SDI output. |
514 | HD EMBD VITC | 0001 | ON | 0: Not superimposed |
|
|
|
| 1: Superimposed |
|
|
|
|
|
118 Setup: Item Settings