Adding and Registering Audio Split Point (Changing Registered Point)

You can add an audio split to an event registered in the play list and change the audio split point.

1

2

3,5

4

1 Open the play list screen.

2 Use the cursor buttons to select the event where you want to add (or change) an audio split point.

3 Press the EVENT button.

This activates the event edit mode.

4 Register the audio split point.

Use the operation buttons or search dial to look for a location for an audio split point. Then hold down the SPLIT button and press the ENTRY button.

5 Press the EVENT button to end registration.

◆NOTE:

•Addition can take place even when the IN point is changed before step 4 or the OUT point is changed after step 4.

Trimming the Audio Split Point

You can change audio split points in frame increments (in 4-

3 Change the audio split point.

frame increments at 24PN).

 

1

2,3 4

1 Open the play list screen.

2 Use the cursor buttons to select the event where you want to change an audio split point.

Hold down the SPLIT button and press the TRIM+ button or the TRIM– button. The IN point is incremented or decremented in frame increments (in 4-frame increments at 24PN).

◆NOTE:

•During trimming the split point is indicated in black numerals against a yellow background in the event list display of the event list split screen.

86 Using Play List: Audio Split Editing