Reference input: Automatic switching of black burst/HD 3 value SYNC, BNC × 1 (loop through × 1), automatic 75 Ω termination provided

SDI input: BNC × 1, complies with SMPTE 292M/ 296M/299M during HD SDI input, complies with SMPTE 259M-C/272M-A, ITU-R BT.656- 4 during SD SDI input

VIDEO OUTPUT

Analog component (switchable):

BNC × 3 (Y, PB, PR)

Y:1.0 V[p-p], 75 Ω during HD output mode

Analog composite output (switchable):

BNC × 3, video 1, video 2, video 3,

1.0V[p-p], 75 Ω during SD output mode

HD SDI/SD SDI output (switchable):

BNC×1, complies with SMPTE 292M/296M/ 299M during HD serial digital output, complies with SMPTE 259M-C/272M-A, ITU-R BT.656-4 during SD serial digital output

Monitor output: BNC × 1, 1.0 V[p-p], 75 Ω

AUDIO

DIGITAL AUDIO

Sampling frequencies:

48 kHz (synchronous with video)

Quantizing: 16 bits

Frequency response:

 

20 Hz to 20 kHz ±1.0 dB

 

(at the reference level)

Dynamic range:

Better than 85 dB

 

(1 kHz emphasis off, “A” weighted)

Distortion:

Less than 0.1 %

 

(1 kHz, emphasis off, reference level)

Crosstalk:

Less than –80 dB

 

(1 kHz, between 2 channels)

Headroom:

18/20 dB selectable

De-emphasis:

T1 = 50 µs, T2 = 15 µs (auto on/off)

AUDIO INPUT

Analog input (CH1, CH2, CH3, CH4):

XLR × 4, 600 Ω/high impedance selectable (factory setting: high impedance) +4/0/–3/–20 dBu selectable

Only CH2 input can be switched between LINE/MIC/MIC +48 V

MIC:

–60 dBu

MIC+48V:

Phantom +48V supported, –60 dBu

SDI input:

BNC × 1, complies with SMPTE 292M/296M/

 

299M during HD SDI input, complies with

 

SMPTE 259M-C/272M-A (480/59.94i), ITU-R

 

BT.656-4 (576/50i) during SD SDI input

AUDIO OUTPUT

Analog output (CH1, CH2, CH3, CH4):

XLR × 4, low impedance, +4/0/–3/–20 dBu selectable

SDI output: BNC × 1, complies with SMPTE 292M/296M/ 299M during HD SDI input, complies with SMPTE 259M-C/272M-A (480/59.94i), ITU-R BT.656-4 (576/50i) during SD SDI input

Monitor output: Pin jacks × 2, –8 dBV, 600 Ω

Headphones: Stereo mini jack (3.5 mm diameter), 8 Ω, variable level

Other input/output

Time code input: BNC × 1, 0.5 V[p-p] to 8.0 V[p-p], 10 kΩ

Time code output: BNC × 1, 2.0 V[p-p] ±0.5 V[p-p], low impedance

RS-422A input/output:

D-sub 9pin, RS-422A interface

IEEE1394 input/output:

 

IEEE1394 6pin × 1

 

400/200/100 Mbps selectable

 

Complies with IEEE1394-1995

 

Complies with IEC61883-Part1,Part2

 

AV/C Command Set supported

USB 2.0:

Host × 1, Device × 1

Inrush current, measured according to European standard

EN55103-1: 20.5 A

Mass and dimensions are approximate values.

Specifications are subject to change without notice.

150 For Long and Trouble-Free Operation: Specifications