Playing Back Play Lists
Setting the Playback Time Code (TC)
During play list playback, you can select whether the time | 5 Use the cursor buttons to choose [SETTING] – | |
code should be replaced and output as a continuous value or | [REPLACE TC] – [START TC] and press the SET | |
the time code of each clip should be output. You can set the | button to enter the start time code. | |
time code start value when it is replaced at output. | ||
| ||
1 Open the play list screen. |
| |
2 Press the MENU button. |
| |
| 3 Use the cursor buttons to choose [SETTING] – |
| |
| [REPLACE TC] – [REPLACE]. |
|
List Play Using
4 Select [ON] and press the SET button.
This replaces the playback time code.
◆NOTE:
•When [OFF] is set, the time code is not replaced, instead the time code of each clip is output.
•When [OFF] is set, go to step 7 and end setup.
The initial value of the start time code is 00:00:00:00 when
replaced.
6 Use the cursor buttons to choose [SETTING] – [REPLACE TC] – [DROP FRAME]. Then press the SET button and select [DF] (drop frame) or [NDF] (non drop frame).
◆NOTE:
• A [DF] setting cannot be made at 24PN.
7 Press the MENU button to end setup.Using Play List: Playing Back Play Lists 93