Displaying Clip Thumbnails on a Hard Disk

You can display thumbnails and manage clips stored on the

hard disk in the same way as clips on P2 cards.

1 Open the explorer screen.

2 Use the cursor buttons to select the partition where

you want to view thumbnails and press the SET button.

A thumbnail of the clip on the partition now appears.

VERIFY:

Verify setting and result at time of

 

recording

 

 

 

 

 

ON: FINISHED

Verification was

 

 

successful

 

 

 

 

ON: FAILED

Verification failed

 

 

 

 

OFF

No verification

 

 

 

* “--” is displayed on P2 store.

 

 

NAME:

User assigned partition names

 

 

 

 

 

 

 

3) Record mode and system format

 

 

 

 

 

 

Indicates the record mode and system format of the

 

 

 

 

 

 

clip at the cursor location.

 

 

 

 

 

4) Disk information

 

 

 

 

 

 

➝Details are provided on the previous page.

 

 

 

 

 

 

 

 

 

 

 

 

 

◆ NOTE:

 

 

 

 

 

 

• Press the EXIT button to return to the explorer screen.

 

 

 

 

 

 

• Change the thumbnail screen display as necessary. These

 

 

 

 

 

 

changes are performed in the same way as when using P2

 

 

 

SET

EXIT

 

cards.

 

 

 

 

 

 

➝For details, refer to “Changing Thumbnail Display” (page 39).

 

1)

 

 

 

 

• Hard disks formatted using FAT can handle up to 1000 clips.

 

 

 

 

 

Any clips beyond that limit cannot be opened.

 

 

 

 

 

 

 

 

 

 

 

 

• Use the TRIM+ / – buttons to move to thumbnail displays on

 

 

 

 

 

 

previous and subsequent partitions.

 

 

 

 

 

 

Viewing Hard Disk Clip Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2)

 

 

 

You can view a variety of metadata on clips stored on a hard

 

4)

disk. The content is the same as that displayed by a P2 card clip property.

3)

1)Display status

Indicates the status of thumbnails of hard disk clips.

2)Partition information

The following information appears.

SERIAL: P2 card serial number

MODEL:

P2 card model name

 

 

NUMBER

Partition number (1 -)

(No.):

 

 

 

DATE/

Date and time of partition recording

TIME:

 

 

 

1 Select a clip in the hard disk thumbnail screen.

Detailed clip information is displayed on the screen.

2 Press the MENU button.

3 Use the cursor buttons to select [PROPERTY] – [CLIP PROPERTY] and press the SET button.

➝For details, refer to “Viewing and Repairing Clip

Information” (page 49).

102 Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk