Panasonic AJ-HPM100P INTERFACE, TIME CODE

INTERFACE

This menu specifies the ID data that will be returned to the controller.

					* An underlined setting indicates an initial value.
	Item		Setting
					Settings and brief function description
FR	SUPER	FR		SUPER
No.	DISP.	No.		DISP.
		0000		OTHER	Specifies the ID data that will be returned to the controller.
		0001		DVCPRO	0: OTHER
		0002		ORIG	1: DVCPRO
202	ID SEL				2: ORIG
					NOTE:
					• Select [OTHER] for ID data for a VTR other than a DVCPRO.
					• Select [ORIG] only when specific Panasonic controllers (such as AJ-A850, separately
					sold accessory) are connected.

TIME CODE

This menu sets the time code.

				* An underlined setting indicates an initial value.
	Item	Setting
				Settings and brief function description
FR	SUPER	FR	SUPER
No.	DISP.	No.	DISP.
		0000	BLANK	Specifies whether or not a VITC signal will be output at the positions selected in menu No.
		0001	THRU	501 VITC POS-1 and No. 502 VITC POS-2 during playback.
				0: VITC signals are not output.
500	VITC BLANK			1: VITC signals are output.
				NOTE:
				• This setting is available only during analog composite output and SD SDI output.
				• In EE mode, the input signal is output with the VITC signal.
		When set to 59.94 Hz		Specifies the position where the VITC signal will be inserted.
				NOTE:
		0000	10L
				• You cannot select the same line as in menu No. 502 VITC POS-2.
		0006	16L	• This setting is available only during analog composite output and SD SDI output.
501	VITC POS-1	0010	20L
		When set to 50 Hz
		0000	7L
		0004	11L
		0015	22L
		When set to 59.94 Hz		Specifies the position where the VITC signal will be inserted.
				NOTE:
		0000	10L
				• You cannot select the same line as in menu No. 501 VITC POS-1.
		0008	18L	• This setting is available only during analog composite output and SD SDI output.
502	VITC POS-2	0010	20L
		When set to 50 Hz
		0000	7L

0006 13L

0015 22L

Setup

Setup: Item Settings 117