Creating Play Lists
The workflow for creating a play list is given below. A play list can be up to 24 hours long.
Preparing new play lists
↓
Registering events and adding existing play lists
↓
Saving play lists
Preparing New Play Lists
This section describes how to delete a play list stored in the play list area of this unit and how to prepare a new play list.
2
5
43
1Select an edit format in the setup menu.•Select an edit format. The unit will then be able to play back only the selected format.
•Select playback channels for added audio.
3
4 Use the cursor buttons to choose [SETTING] – [INSERT MODE] and press the SET button.
This selects INSERT and engages the insert edit mode.
5 Use the cursor buttons to choose [FILE] – [NEW].◆NOTE:
•Holding down the SHIFT button and pressing the RESET button performs the same function as [FILE] – [NEW].
◆NOTE:
The settings in the following setup menus and play list menu determine the edit format.
•020 SYS FORMAT (➝Refer to page 112.)
•024 REC FMT(SD) (➝Refer to page 112.)
•026 PLY LST FMT (➝Refer to page 112.)
The following setup menu settings determine the added audio settings.
•792 A DUB CH (➝Refer to page 125.)
•793 A DUB PB MIX (➝Refer to page 125.)
6 Select [YES] and press the SET button.
This deletes the open play list and displays a new play list
without any events.
◆NOTE:
•Be sure to choose [FILE] – [NEW] after changing the edit format in the setup menu. Otherwise the edit format does not change.
68 Using Play List: Creating Play Lists