Using SD/SDHC Memory Cards
This unit supports SD/SDHC memory cards.
◆NOTE:
•Current SETUP menu settings can be saved to and loaded from an SD memory card. For details, refer to page 128.
Displaying Miscellaneous SD
Memory Card Information
Use the following procedure to display SD memory card
status on screen for checking.
1 Open the thumbnail screen.
2 Press the MENU button.
3 Use the cursor buttons to choose [PROPERTY] – [DEVICE] – [SD CARD] and press the SET button.
The following information may also appear depending on card status.
SD STANDARD: | Indicates that an SD memory |
| card is formatted according to |
| the SD/SDHC standard. |
|
|
| SUPPORTED: Complies with SD/ |
| SDHC |
|
|
| NOT SUPPORTED: Does not |
| comply with SD/SDHC |
|
|
USED: | Used capacity (bytes) |
|
|
BLANK: | Free space (bytes) |
|
|
TOTAL: | Total capacity (bytes) |
NUMBER OF CLIPS: The number of clips on an SD
| memory card when clips have |
| been copied to an SD memory |
| card using a proxy or a P2 |
| camera recorder. |
|
|
PROTECT: | Write protected |
• This unit cannot record proxies.
4 Press the SET button and the MENU button to endprocessing.
Formatting SD Memory Cards
Use the following procedure to format an SD memory card
inserted in an SD memory card slot.
1
2
3 Use the cursor buttons to select [OPERATION] – [FORMAT] – [SD CARD].4 Select [YES] and press the SET button.
The card is now formatted.
◆NOTE:
• To cancel formatting, select [NO] and press the SET button.
5 Press the SET button (check) when the completionmessage appears.104 Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards