Changing Thumbnail Display

The thumbnail screen can be customized to suit operating

3 Use the cursor buttons to select the clip type that

conditions and improve efficiency.

should appear under [THUMBNAIL].

Switching the Type of Information That is

Displayed

1

4

Management Clip

3 2

1 Open the thumbnail screen.

2 Press the MENU button.

ALL CLIP:

Show all clips

SAME FORMAT

Show clips in the same format as

CLIPS:

the system

SELECTED

Show clips selected using the SET

CLIPS:

button

MARKED CLIPS: Show clips to which shot marks

 

have been attached

 

 

TEXT MEMO

Show clips that contain text memo

CLIPS:

data

◆ NOTE:

In the following instances, the thumbnail in the row below at the text memo location may be grayed out when a text memo clip appears.

• An AVC-Intra clip when an optional AVC-Intra codec board has not been installed.

• An AVC-Intra clip with a different SYSTEM FREQ. setting

SLOT CLIPS:

Show clips on P2 card in slot No. n

 

 

4 Press the SET button.

◆NOTE:

(These operations can also be performed using buttons.)

•Press SHIFT + IN and the indication changes in the following order each time these buttons are pressed: SELECTED ➝ SLOT 1 ➝ SLOT 2 … SLOT 6 ➝ SELECTED. (Only slots with cards will appear.)

•Press SHIFT + OUT to switch to ALL CLIP.

Clip Management: Thumbnail and Clip Management 39