4 When the cursor is in the lower half of the LCD monitor, use the right and left (b a) cursor buttons to go to the thumbnail text memo you want to play back and press the PLAY button.

The clip is played back from the text memo time code location selected with the cursor.

When you press the STOP button to interrupt ongoing playback, or when playback stops upon reaching the end of the clip, the thumbnail screen reappears and the cursor returns to the thumbnail text memo location where playback was started.

Press the thumbnail menu button to select EXIT or press the EXIT button and the cursor returns to the upper half of the thumbnail screen.

Deleting Text Memos

Opening the text memo display from the thumbnail screen allows you to delete text memos.

1 Open the text memo display from the thumbnail screen.

2 Use the cursor buttons to move to the thumbnail for which you want to delete the text memo and press the SET button.

The cursor moves to the row below.

3 Select the thumbnail for witch you want to delete the text memo and select [DELETE] from the menu.

4 Select [YES] in the confirmation screen that appears.

The text memo is deleted.

Attaching Shot Marks

Attach shot marks to distinguish clips from each other.

3

1

2

1 Open the thumbnail screen.

2 Use the cursor buttons to place the cursor on the desired clip.

3 Hold down the SHIFT button and press the TEXT MEMO button.

Each press of this button turns the shot mark indicator on

and off.

◆NOTE:

•When attaching or deleting shot marks for clips that span multiple P2 cards, be sure to load all the P2 cards that the clip is recorded on.

Management Clip

Clip Management: Attaching Text Memos and Shot Marks 45