Open the play list screen.

Registering From Video

Use the following procedure to newly register an event

 

 

 

◆ NOTE:

containing an audio split.

 

 

• In the split display, “–” indicates forward while “+” indicates

 

 

 

 

reverse direction.

◆ NOTE:

 

• A split can be registered from the start of the original clip to the

• Refer to the “Adding and Registering Audio Split Point (Changing

 

event OUT point.

Registered Point)” section to add an audio split to a registered

 

 

event.

• First set the insert mode to INSERT.

7

1

2

4

6

5

3

4,5,6

1

2 Use the cursor buttons to choose the location where you want to add the event.

3 Press the INSERT button.

This activates the event register mode.

 

Clip A

IN

OUT

Play list

Video Event 01

Event 02

 

 

Audio

Possible audio split range

•Set the IN point before the split point.

•A SPLIT where the audio precedes the video cannot be made for an event whose IN point is at the start of the clip.

•When using the INSERT button to register a new event or using the EVENT button in a final event to register an event, register a SPLIT point before registering an OUT point as a new event will otherwise be registered.

List Play Using

4 Register an IN point.

Use the operation buttons or search dial to look for a location to start an event. Then hold down the IN button and press the ENTRY button.

5 Register the audio split point.

Use the operation buttons or search dial to look for a location for an audio SPLIT point. Then hold down the SPLIT button and press the ENTRY button.

6 Register an OUT point

Use the operation buttons or search dial to look for a location to end an event. Then hold down the OUT button and press the ENTRY button.

7 Press the EVENT button to end registration.

The INSERT button will also terminate registration.

Using Play List: Audio Split Editing 85