Priority |
| Display | Description | Deck operation | |
|
| ||||
| No | Character code |
|
| |
|
|
|
|
| |
|
|
| Displayed when data was corrupted due to a P2 card error during recording. | STOP | |
|
| CARD | This error is displayed after recording ends and until the start of the next operation. |
| |
13 | 26 | This error is not displayed during playback. (* indicates the slot number where the |
| ||
ERROR<******> |
| ||||
|
| error occurred.) |
| ||
|
|
|
| ||
|
|
| Replace the P2 card in the slot where the error occurred. |
| |
|
|
|
|
| |
14 | 21 | REC WARNING | Displayed when a video or audio error occurs during recording. | STOP | |
To continue operation, turn the power off and then back on again. |
| ||||
|
|
|
| ||
|
|
|
|
| |
15 | 50 | BATTERY EMPTY | Displayed when a drop in the backup battery voltage for the internal clock is | Operation | |
detected at power on. Replace the internal battery. *5 | continues | ||||
|
|
| |||
|
|
|
|
| |
16 | 70 | DIR NG | Directory structure does not comply with the P2 card standard. Make a quick | Operation | |
CARD<123456> | backup of card data and format the card. | continues | |||
|
| ||||
|
|
|
|
| |
17 | 71 | RUNDOWN | The P2 card has been rewritten the maximum number of times. You are | Operation | |
CARD<123456> | recommended to replace the card with a new card. | continues | |||
|
| ||||
|
|
|
|
| |
18 | 10 | FAN STOP | Displayed when the fan motor stops. | Operation | |
| continues | ||||
|
|
|
| ||
|
|
|
|
|
◆NOTE:
*1 This warning appears only during recording.
Then the video recording goes black and the audio signal is muted.
*2 This warning appears only during recording. Then the audio is recorded mute.
*3 This warning appears only during recording. The internally generated time code is recorded.
*4 This warning appears at any time. This error disables input to the digital video interface.
*5
The following warning messages appear when an incorrect operation is attempted in the thumbnail play list screen.
Item | Message | Description | Measure |
|
|
|
|
| CANNOT ACCESS! | Data cannot be accessed because it is corrupted | Restore media and clips to normal state before |
|
| or for other reasons. | access. |
|
|
|
|
| WRITE PROTECTED! | The P2 or SD card is write protected. | Insert |
|
|
|
|
| CARD FULL! | The P2 or SD card is full. | Insert media with sufficient capacity. |
|
|
|
|
| NO CARD! | No P2 or SD card is inserted. | Insert compatible media. |
|
|
|
|
| CANNOT DELETE! | Contents version mismatch prevents deletion. | Match devices and contents version. |
|
|
|
|
| UNKNOWN | Warning displayed to indicate contents version | Match devices and contents version. |
| CONTENTS | mismatch. |
|
| FORMAT! |
|
|
|
|
|
|
| CANNOT FORMAT! | P2 card problem prevents formatting. | Check P2 card. |
|
|
|
|
| CANNOT REPAIR! | Selected content cannot be repaired. | Check selected content. |
|
|
|
|
| CANNOT RE- | A clip that does not span multiple cannot be | Check selected content. |
Thumbnails | CONNECT! | reconnected. |
|
|
|
|
|
| NO INPUT! | No data is input. | Set after making input. |
|
|
|
|
| INVALID VALUE! | Entered data was invalid. | Enter data in a valid range. |
|
|
|
|
| UNKNOWN DATA! | The metadata character code is invalid. | Use |
|
|
| viewer to enter correct characters. |
|
|
|
|
| CANNOT REPAIR IN | Some of the selected clip could not be repaired. |
|
| SELECTION! |
|
|
|
|
|
|
| NO SD CARD! | No SD card is inserted. | Insert an SD card. |
|
|
|
|
| NO COPY TO SAME | A clip cannot be copied to the card storing the | Copy the selected clip to a card that does not contain |
| CARD! | original clip. | the original clip. |
|
|
|
|
| SAME CLIP IS | The selected clips contain multiple copies of the | Multiple copies of the same clip (duplicated using |
| SELECTED! | same clip (duplicated using COPY). | COPY) cannot be simultaneously copied. Deselect all |
|
|
| identical copies from the selected clips. |
|
|
|
|
Operation
For Long and