| Item | Setting |
| |
|
|
|
| Settings and brief function description |
FR | SUPER | FR | SUPER | |
No. | DISP. | No. | DISP. |
|
|
|
|
|
|
|
| 0000 | OFF | Specifies whether or not LTC data will be superimposed on HD SDI output. |
515 | HD EMBD LTC | 0001 | ON | 0: Not superimposed |
|
|
|
| 1: Superimposed |
|
|
|
|
|
|
| 0000 | OFF | Specifies whether or not the internal time code generator value should be recorded in the |
|
| 0001 | ON | VAUX area. |
|
|
|
| 0: The internal time code generator value is not recorded. |
518 | VITC GEN |
|
| Record the time code value when it is superimposed on input video signals. |
|
| 1: The internal time code generator value is recorded. | ||
|
|
|
| |
|
|
|
| NOTE: |
|
|
|
| When 1394 is selected as the input signal, the time code signal superimposed on the |
|
|
|
| compressed input signal is recorded regardless of settings in this menu. |
|
|
|
|
|
|
| 0000 | SBC | Selects user bits in the LTC data output by the TIME CODE OUT and HD SDI connectors |
|
| 0001 | F_RATE | or user bits in the SBC area (DVCPRO HD only) output via the IEEE 1394 terminal during |
519 | UB OUT SEL |
|
| playback of clips in 720/24PN, 720/30PN and 720/25PN formats as well as optional AVC- |
|
| Intra 1080/24PN, 30PN and 25PN clip formats. | ||
|
|
|
| |
|
|
|
| 0: Outputs the user bits recorded in the SBC area. |
|
|
|
| 1: Outputs the frame rate information recorded in the VAVX area. |
|
|
|
|
|
Definition of terms: |
|
|
| |
|
| |||
SBC (Sub Code Data) area: | This area, which is separate from video and audio data area on a P2 card, stores SMPTE/ | |||
|
|
| EBU compliant time code, recording dates and other information. | |
|
| |||
VAUX (Video Auxiliary Data) area: | An area in the video data area on a P2 card that stores additional information on video | |||
|
|
| data. |
|
|
|
|
|
|
VIDEO
This menu is used for video settings.
|
|
|
| * An underlined setting indicates an initial value. | |
|
|
|
|
| |
| Item | Setting |
| ||
|
|
|
| Settings and brief function description | |
FR | SUPER | FR | SUPER | ||
No. | DISP. | No. | DISP. |
| |
|
|
|
|
| |
|
| 0000 | 100%CB | Sets the internal signal type. SMPTE and ARIB signals are available in HD mode only (black | |
|
| 0001 | 75%CB | in SD mode). | |
|
| 0002 | SMPTE | 0: 100% color bar | |
601 | VIDEO INT SG | 0003 | ARIB | 1: 75% color bar | |
|
| 0004 | BLACK | 2: SMPTE color bar | |
|
|
|
| 3: ARIB color bar | |
|
|
|
| 4: Black | |
|
|
|
|
| |
|
| 0000 | DR OFF | Specifies the method for processing HD SDI input. (Available only for DVCPRO HD) | |
|
| 0001 | DR ON | 0: Records the 8 higher bits after rounding up the two lowest bits. | |
602 | SDI IN MODE |
|
| 1: Records the signal with 8 higher bits, obtained by dynamic rounding. | |
|
| NOTE: | |||
|
|
|
| ||
|
|
|
| Records 8 | |
|
|
|
| input. | |
|
|
|
|
| |
|
| 0000 | CROP | Specifies the picture angle during | |
620 | DOWNCON | 0001 | 0: Side cut mode | ||
MODE | 0002 | SQUEEZ | 1: Letter box mode | ||
| |||||
|
|
|
| 2: Squeeze mode | |
|
|
|
|
| |
|
| 0000 | Specifies the picture angle during | ||
621 | UPCONV MODE | 0001 | CROP | 0: Side panel mode | |
0002 | STRECH | 1: Top and bottom cut in vertical direction | |||
|
| ||||
|
|
|
| 2: Stretch mode | |
|
|
|
|
| |
Setup
Setup: Item Settings 119