Panasonic AJ-HPM100P Setup, Unit Setup, Automatic Loading of User Setting File at Power up

Setup

Unit Setup

The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU. The SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five user files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards.

System

Basic

Operation

Interface

TimeCode

Video

Audio

DIF

Menu

System

User settings file

file

SHIFT+FF

SHIFT+FF

SHIFT+FF

SHIFT+FF

USER1

USER2

USER3

USER4

USER5

SHIFT+REW

SHIFT+REW

SHIFT+REW

SHIFT+REW

SHIFT+REW

SHIFT+FF

A10 CARD READ A11 CARD WRITE

SD memory card

This unit can possess up to five user files, each of which can be selected from a menu setting.

Setting values can be changed as necessary.

➝For details on change operations, refer to “Changing Settings” (page 107).

After a change, the content of USER1 can be saved (copied) to USER2 to USER5.

➝For details, refer to “Setup menu No. A01 (SAVE)” (page 127).

SETUP menu settings can be saved to and loaded from an SD memory card.

➝For details, refer to “Setup menu No. A10 (CARD READ), A11 (CARD WRITE)” (page 127).

Automatic Loading of User Setting File at Power up

You can specify the user setting files that will be loaded in USER1 at power up. You can also decide to use the same settings as last time.

➝For details, refer to “Setup menu No. A02 (P.ON LOAD)” (page 127).

106 Setup: Unit Setup