Jog and Shuttle Operations Using the Search Dial

The search dial is used to search and check video.

When the power is turned on, the search dial will not operate

Each press of the dial alternates it between SHTL mode and

unless it is first returned to the STILL position.

JOG mode.

 

Jog Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Turn the search dial.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The dial’s click stops are released and playback is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

performed at the speed the dial (–1 to +1×) is turned.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the dial stops turning, the video becomes a still

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 To go to another mode from the jog mode, press the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

button of the desired mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

◆ NOTE:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The direct search mode that allows you to go directly to the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

shuttle mode or jog mode by turning the search dial is a factory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

default.

1 Press the search dial so that it remains pressed in.

 

• You can select [KEY] in setup menu No. 100 (SEARCH ENA) so

 

that the unit will not engage the search mode unless you press

 

the STILL/PAUSE button.

 

The jog mode is now engaged.

 

 

 

 

 

 

 

 

 

 

 

Shuttle Mode (SHTL Mode)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Turn the search dial.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The playback picture speed changes from 0 to ±32×

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

depending on dial position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use setup menu No. 101 (SHTL MAX) to set maximum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

speed to ±8, ±16, ±32, ±60 or ±100×. The dial has a click-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

stop at the center for viewing still pictures.

Introduction

1 Press the search dial to release it.

This engages the shuttle mode.

When the power has just been turned on, turn the search

dial to its center position.

4 To go to another mode from the shuttle mode, pressthe STOP button or other button.

◆NOTE:

•The playback audio is audible at speeds in the range –10 to +10× from the audio monitor output.

•The playback audio in the search mode contains noise.

•Playing back a clip that spans a multiple of P2 cards at speeds faster than ±1× may break up the sound in the transition to another card; this is normal and not indicative of a malfunction.

•Playing back a clip at speeds faster than –10× may break up the sound; this is normal and not indicative of a malfunction.

2 Press the STILL/PAUSE button.

Introduction: Jog and Shuttle Operations Using the Search Dial 35