Panasonic AJ-HPM100P Changing Event IN and OUT Points, Trimming Events, 3,6, 4,5, 2 3 3,4,5 4, List Play Using, 4 Change the OUT point, 3 Press the EVENT button

Changing Event IN and OUT Points

You can change the IN and OUT points for a play list event	4 Register a new IN point.
during video playback.	Use the operation buttons or search dial to look for a
	location to start an event. Then hold down the IN button
	and press the ENTRY button.
3,6	5 Register a new OUT point.
	Use the operation buttons or search dial to look for a
1	location to end an event. Then hold down the OUT button
	and press the ENTRY button.

6 Press the EVENT button to end the change operation.

◆ NOTE:

List Play Using

2 4 5 4,5

1 Open the play list screen.

2 Select the event you want to change.3 Press the EVENT button.

This activates the event edit mode.

•Steps 4 and 5 can be handled as alternatives, you do not have to carry out both steps.

•If the new IN point comes after an already registered OUT point, the existing OUT point will be reset. A return to the play list screen will show that the OUT point has automatically been changed to the end of the clip.

•If the new OUT point comes before an already registered IN point, a return to the play list will show that the IN point of that clip has automatically been changed and registered at the beginning of the clip.

•An event with a voice-over cannot be modified. Delete the voice- over before modifying the event.

•The changed content will be neglected if the unit is turned off during change of an event from video.

Trimming Events

You can change IN and OUT points for events in frame	3 Use the cursor buttons to change the IN point.
increments (in 4-frame increments at 24PN).	Hold down the IN button and press the TRIM+ button or
	the TRIM– button. The IN point is incremented or
	decremented in frame increments (in 4-frame increments
	at 24PN).
1	Press the ENTRY button to finalize.
	4 Change the OUT point.
	Hold down the OUT button and press the TRIM+ button or
	the TRIM– button. The OUT point is incremented or
	decremented in frame increments (in 4-frame increments
	at 24PN).
	Press the ENTRY button to finalize.

2 3 3,4,5 4 5

1 Open the play list screen.

2 Select the event you want to change.

5 Change the SPLIT point

Hold down the SPLIT button and press the TRIM+ or the TRIM– button. The split point is incremented or decremented in frame increments (in 4-frame increments at 24PN).

Press the ENTRY button to finalize.

Using Play List: Editing Play Lists 75