Panasonic AJ-HPM100P manual 124

	Item	Setting
				Settings and brief function description
FR	SUPER	FR	SUPER
No.	DISP.	No.	DISP.
		0000	CH1	Specifies the input signal to be recorded on the audio CH1.
		0001	CH2	0: Audio input CH1 signal
		0002	CH3	1: Audio input CH2 signal
725	REC CH1	0003	CH4	2: Audio input CH3 signal
		0004	CH1+2	3: Audio input CH4 signal
		0005	CH3+4	4: Mixed audio input CH1 and CH2 signal
				5: Mixed audio input CH3 and CH4 signal
		0000	CH1	Specifies the input signal to be recorded on the audio CH2.
		0001	CH2	0: Audio input CH1 signal
		0002	CH3	1: Audio input CH2 signal
726	REC CH2	0003	CH4	2: Audio input CH3 signal
		0004	CH1+2	3: Audio input CH4 signal
		0005	CH3+4	4: Mixed audio input CH1 and CH2 signal
				5: Mixed audio input CH3 and CH4 signal
		0000	CH1	Specifies the input signal to be recorded on the audio CH3.
		0001	CH2	0: Audio input CH1 signal
		0002	CH3	1: Audio input CH2 signal
727	REC CH3	0003	CH4	2: Audio input CH3 signal
		0004	CH1+2	3: Audio input CH4 signal
		0005	CH3+4	4: Mixed audio input CH1 and CH2 signal
				5: Mixed audio input CH3 and CH4 signal
		0000	CH1	Specifies the input signal to be recorded on the audio CH4.
		0001	CH2	0: Audio input CH1 signal
		0002	CH3	1: Audio input CH2 signal
728	REC CH4	0003	CH4	2: Audio input CH3 signal
		0004	CH1+2	3: Audio input CH4 signal
		0005	CH3+4	4: Mixed audio input CH1 and CH2 signal
				5: Mixed audio input CH3 and CH4 signal
		0000	AUTO	Specifies audio processing to be performed between clips and edit points created using
		0001	CUT	play list or edit copy.
				0: Depends on recording status. (Refer to the section “Audio V Fade Function” (page
731	PB FADE			135).)
				1: Forcible cut.
				NOTE:
				The IEEE1394 connector output is forcibly cut also in the AUTO setting.
		0000	OFF	Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
732	EMBEDDED AUD	0001	ON	output.
				0: Audio data is not superimposed.
				1: Audio data is superimposed.
		0000	2CH	Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV (25
		0001	4CH	Mbps) recording.
				0: Does not supply microphone current.
775	25M REC CH			1: Records on four channels.
				NOTE:
				DVCPRO HD, AVC-Intra50 (option) and AVC-Intra100 (option) always record on 8
				channels, and DVCPRO50 always records on 4 channels.
		For AJ-HPM100P
		0000	FS-20	Specifies the standard level.
		0001	FS-18	0: 20 dB
		0002	FS-12	1: 18 dB
776	REF LEVEL			2: 12 dB
		For AJ-HPM100E
		0000	FS-20
		0001	FS-18
		0002	FS-12

124 Setup: Item Settings