Panasonic AJ-HPM100P LCD Panel, CTL, SDI SDI, USYSTEM, 6.U lamp, 1080i720p, VIDEO AUDIO, CMPST ANALOG, DVCPRO AVC-I, 1394SG 1394SG, 1.Level meter, 3.Format display

LCD Panel

6

		dB			dB				dB			dB
	4				0			4				0
	3							3
	2				-12			2				-12
1	1							1
		0			-20				0			-20
	-1								-1
	-2							-2
	-3				-30			-3				-30
	-4				-40			-4				-40
					-∞							-∞
			L	R		L	R			L	R		L	R

CTL

TC

UB

VIDEO AUDIOCMPST ANALOGSDI SDI1394SG 1394SGUSYSTEM1080i720p 59.9450DVCPRO AVC-I

HD 50

5

4

3

1.Level meter

Indicates the level of audio signals for CH1, CH2, CH3 and CH4.

The input signal level of audio signals is indicated during recording and when EE is selected. During playback the meter indicates output signal levels. Use the METER selector button to switch the audio level display to FULL mode or FINE mode. Use the setup menu to change the reference level.

FINE mode				FULL mode
dB			dB
4			0			Reference level
3
2			-12
1
0			-20
-1
-2
-3			-30
-4			-40
	L	R		L	R

2.Counter display

This function shows the counter and time codes.

It displays CTL (relative position from the beginning), TC (read time code) and UB (user bit of the read time code).

3.Format display

Indicates the set record format and the format of video recorded on an inserted P2 card.

2

4.TV system display

Indicates the selected TV system. Use the SYSTEM setting No. 25 (SYSTEM FREQ) setup menu to switch between 59.94 Hz or 50 Hz.

59.94: Lights when a 59.94 Hz system frequency is selected.

50:Lights when a 50 Hz system frequency is selected.

5.INPUT SELECT display

Indicates selected VIDEO and AUDIO status. Except for analog audio signals, the indicator flashes when there is no input for the selected signal.

When SDI input is selected, this display flashes if the input signal is not compatible with the system format.

VIDEO

CMPST:	Analog composite video input signals
SDI:	Serial digital video input signals
1394:	IEEE1394 input signals
SG:	Internal reference signals
AUDIO
ANALOG:	Analog audio input signals
SDI:	Serial digital audio input signals
1394:	IEEE1394 input signals
SG:	Internal reference signals

6.U lamp

In the EE mode, this lamp lights when an input signal

contains UMID information.

Lights during playback when the recording contains

UMID information.

24 Introduction: Control Reference Guide