■Incrementing the COUNT value of the USER CLIP NAME for clips exceeding 4 GB
In the following case, one shot is recorded as multiple clips and the COUNT value is automatically incremented and recorded for each shot.
• When an 8 GB or larger P2 card is used in this unit and each continuous recording exceeds a preset time.
➝For details, refer to “Dividing clips over 4 GB in length” (page 34)
• When one recording spans multiple cards.
Example of a recording on one P2 card (DVCPRO HD):
REC start |
| Stop | ||||
(start of recording) |
| (recording stop) | ||||
| Recording duration = 6 minutes |
|
| |||
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Clip 1 |
| Clip 2 |
|
| |
| COUNT value = A |
| COUNT value = A + 1 |
|
| |
|
|
|
|
|
|
|
| Approx. 5 min. |
| Approx. 1 min. |
|
| |
|
|
| ||||
Example of recording a clip on two P2 cards:
REC start |
| Stop | ||||
(start of recording) |
| (recording stop) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Clip 1 |
| Clip 2 |
|
|
|
| COUNT value = A |
| COUNT value = A + 1 |
|
|
|
|
|
|
|
|
| |
| 1st card |
| 2nd card |
| ||
|
|
| ||||
A P2 device will indicate the thumbnail and COUNT value of clip 1 when thumbnails and property of the clip are displayed.
Loading Set Metadata Values
Use the following procedure to load metadata from an SD memory card.
1 Insert the SD memory card storing the metadata upload file.
2
3
4 Use the cursor buttons to select [META DATA] – [LOAD] and press the SET button.
The filename of the metadata upload file on the SD memory card appears.
◆NOTE:
•When the file name is displayed, use the right cursor button to show the metadata name. Use the left cursor button to show the file name.
5 Use the cursor buttons to select the file to load and press the SET button.
6 Select [YES] and press the SET button.
The file is now loaded.
7 Press the MENU button to end processing.
Checking and Revising Loaded Metadata
Use the following steps to check metadata loaded from an SD
memory card.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the thumbnail menu button and select [META
DATA] – [PROPERTY] from the Thumbnail menu.
The screen shown below appears.
54 Clip Management: Attaching Metadata to Clips