Time difference | City/Region |
|
|
+07:00 | Bangkok |
|
|
+07:30 |
|
|
|
+08:00 | Beijing |
|
|
+08:30 |
|
|
|
+09:00 | Tokyo |
|
|
+09:30 | Darwin Islands |
|
|
+10:00 | Guam |
|
|
+10:30 | Lord Howe Island |
|
|
+11:00 | Solomon Islands |
|
|
+11:30 | Norfolk Islands |
|
|
+12:00 | New Zealand |
|
|
+12:45 | Chatham Islands |
|
|
+13:00 |
|
|
|
Kwajalein Atoll | |
|
|
| |
|
|
Midway Islands | |
|
|
| |
|
|
Hawaii | |
|
|
Marquesas Islands | |
|
|
Alaska | |
|
|
| |
|
|
Time difference | City/Region |
|
|
Los Angeles | |
|
|
| |
|
|
Denver | |
|
|
| |
|
|
Chicago | |
|
|
| |
|
|
New York | |
|
|
| |
|
|
Halifax | |
|
|
Newfoundland | |
|
|
Buenos Aires | |
|
|
| |
|
|
Central Atlantic time | |
|
|
| |
|
|
Azores | |
|
|
| |
|
|
◆NOTE:
•The clock is accurate to within about ±30 seconds a month with the power off.
•When the precise time is required, check and reset the time while the power is on.
OPERATION
This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed of
FFand REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected, PLAY delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.
*An underlined setting indicates an initial value.
| Item | Setting |
| ||
|
|
|
| Settings and brief function description | |
FR | SUPER | FR | SUPER | ||
No. | DISP. | No. | DISP. |
| |
|
|
|
|
| |
|
| 0000 | DIAL | Specifies method for transferring to the search mode (search dial operation). | |
100 | SEARCH ENA | 0001 | KEY | Specifies method for transferring to search dial operation. | |
|
| 0: Press the STILL button or turn the search dial to engage search dial operation. | |||
|
|
|
| ||
|
|
|
| 1: Press the STILL button to engage search dial operation. | |
|
|
|
|
| |
|
| 0000 | ×8 | Sets the maximum shuttle speed operation. | |
|
| 0001 | ×16 | 0: 8× normal speed | |
101 | SHTL MAX | 0002 | ×32 | 1: 16× normal speed | |
0003 | ×60 | 2: 32× normal speed | |||
|
| ||||
|
| 0004 | ×100 | 3: 60× normal speed | |
|
|
|
| 4: 100× normal speed | |
|
|
|
|
| |
|
| 0000 | ×32 | Sets the maximum speed of FF and REW operation. | |
|
| 0001 | ×60 | 0: 32× normal speed | |
|
| 0002 | ×100 | 1: 60× normal speed | |
|
| 0003 | SEEK | 2: 100× normal speed | |
102 | FF.REW MAX |
|
| 3: Seek operation to start of clip | |
|
|
|
| NOTE: | |
|
|
|
| • When SEEK is selected, FF and REW operations for FF and REW commands | |
|
|
|
| transferred via 9P and 1394 are performed at 100× normal speed. | |
|
|
|
| • The seek operation is available in STILL and STOP PB mode. | |
|
|
|
|
| |
114 Setup: Item Settings