Panasonic AJ-HPM100P Changing Settings, Change Operations, Making changes using the PF buttons, 4,5, 3,4, 1,5, 3,4, 1,32, Setup, 4 Change set values, 5 Finalize the change

Changing Settings

The menus on the LCD monitor or a monitor (when the SUPER switch on the right side of the LCD monitor is set to “ON”) connected to the ANALOG COMPOSITE MONITOR OUT connector make it possible to change settings.

Change Operations

	4 Change set values.
4,5	Select the item to change, hold down the STILL/PAUSE
	button and turn the search dial or press the left (b) or
	right (a) button to change the setting.
	•Turn the dial clockwise (or press the right (a) button) to
	increment the set number and turn it counterclockwise
	(or press the left (b) button) to decrement it.
	•Release the STILL/PAUSE button after making the
5	change.
	•In the SHTL mode, set the search dial to the center
	position or items will move.
	•Repeat the operations described in steps 3 and 4 when
	there are more items to change.

Setup

3,4 1,5 2 3,4

1 Press the MENU button.

The setup menu screen appears on the LCD monitor and the counter display indicates the setup menu number.

2 Select the file to change.

•Hold down the SHIFT button and press the FF button or the REW button to switch to the next or previous file.

5 Finalize the change.

Press the MENU button.

In the confirmation message that appears, press the SET button to accept the change or press the EXIT button to cancel it. The menu closes after this operation.

Making changes using the PF buttons

3 Select items to change.

Turn the search dial or press the up (▲) or down (▼) buttons to move the cursor (*) to the item you want to change.

•Use the search dial in JOG mode.

•Turn the dial clockwise to increment item numbers (001➝002➝003➝004➝) and counterclockwise to decrement them.

•To switch to the next item, hold down the PLAY button and press the FF button or the + button. To switch to a previous item, hold down the PLAY button and press the REW button or the – button.

1,32

You can assign three of the items that are most often changed to the PF buttons to enable quick changes of the setting values.

Setup: Changing Settings 107