Limiters
$ Setting/releasing the limiters
OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505
1.To set the upper limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the upper limit.
While holding down the MEMORY button on the controller, press PRESET button 2 and PRESET button 3 simultaneously for at least 5 seconds.
The setting is completed as soon as the lamp of the PRESET button 5 comes on.
To release the setting:
While holding down the MEMORY button on the controller, press PRESET button 2 and PRESET button 3 simultaneously for at least 5 seconds.
The setting is released when the lamp of the PRESET button 10 comes on.
3.To set the left-most limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the left- most limit.
While holding down the MEMORY button on the controller, press PRESET button 1 and PRESET button 6 simultaneously for at least 5 seconds.
The setting is completed as soon as the lamp of the PRESET button 5 comes on.
To release the setting:
While holding down the MEMORY button on the controller, press PRESET button 1 and PRESET button 6 simultaneously for at least 5 seconds.
The setting is released when the lamp of the PRESET button 10 comes on.
2.To set the lower limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the lower limit.
While holding down the MEMORY button on the controller, press PRESET button 7 and PRESET button 8 simultaneously for at least 5 seconds.
The setting is completed as soon as the lamp of the PRESET button 5 comes on.
To release the setting:
While holding down the MEMORY button on the controller, press PRESET button 7 and PRESET button 8 simultaneously for at least 5 seconds.
The setting is released when the lamp of the PRESET button 10 comes on.
4.To set the right-most limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the
While holding down the MEMORY button on the controller, press PRESET button 4 and PRESET button 9 simultaneously for at least 5 seconds.
The setting is completed as soon as the lamp of the PRESET button 5 comes on.
To release the setting:
While holding down the MEMORY button on the controller, press PRESET button 4 and PRESET button 9 simultaneously for at least 5 seconds.
The setting is released when the lamp of the PRESET button 10 comes on.
- 44 -
