Manuals / Panasonic / Computer Equipment / Network Card

Panasonic AW-PH360N manual OAttaching the chain, With the AW-E350/AW-E650

Models: AW-PH360N

1 52

Download 52 pages 54.4 Kb

Page 16

OAttaching the chain

Installation (The installation work must be performed by your dealer without fail.)

OAttaching the chain

1.Attach one end of the chain to the pan/tilt head using a chain attachment screw (M4!8 mm: with flat washer/spring washer).

2.Position the other end of the chain over the screw hole on the top of the camera and attach it using a chain attachment screw (M4!6 mm: with flat washer/spring washer).

<Notes>

OBe sure to tighten all screws firmly with a screwdriver or similar tool.

OWhen the hole on the camera is M2.6, attach the chain with the M2.6!6 mm (with flat washer/spring washer) chain attachment screw.

OWhen using the AW-E860/AW-E750/ AW-E655 camera, the mounting spacer must be attached to the top panel of the camera before attaching the chain. Position the end of the chain over the hole on the mounting spacer and attach it using a chain attachment screw

(M4!6 mm: with flat washer/spring washer).

Be sure to tighten the mounting spacer and all screws firmly with a screwdriver or similar tool.

This chain is for use with the AW-E350, AW-E650, AW-E655, AW-E750 and AW-E860 convertible cameras. It cannot be used with any other camera.

When attaching any other camera to the pan/tilt head, carefully check the pan/tilt head operation and that appropriate measures have been taken to ensure the camera does not fall.

With the AW-E350/AW-E650

Chain attachment screw

M4!6 mm or M2.6!6 mm: with flat washer/spring washer

Chain

Chain attachment screw

M4!8 mm: with flat washer/spring washer

Chain

Chain attachment screw M4!8 mm: with flat washer/spring washer

With the AW-E655/AW-E750/AW-E860

Chain attachment screw
M4!6 mm: with
flat washer/spring	Chain
washer	Chain

Mounting spacer (included with the AW-E655/AW-E750/AW-E860)

Chain attachment screw

M4!8 mm: with flat washer/spring washer

- 16 -

Image 16

Panasonic AW-PH360N manual OAttaching the chain, With the AW-E350/AW-E650, With the AW-E655/AW-E750/AW-E860

Contents

Before attempting to connect, operate or adjust this product AW-PH360NIndoor Pan/Tilt Head Printed in Japan1 indicates safety information HAZARDOUS MOVING PARTS KEEP FINGERS AND OTHER BODY PARTS AWAY1 indicates safety information FCC NoteContents AccessoriesIntroduction AccessoriesInstallation precautions Precautions for use Parts and their functions Parts and their functions 1 Tilting arm$ Assembling the pan/tilt head Suspended installationStand-alone installation OAttaching the tilting armFor suspended installation For stand-alone installationFor AW-RP605A For a soft landing$ Transmission signal selection setting OAnalog/IEEE1394 card settingsOWEB card settings OSDI settings2 When using the AW-RP605A controller $ Setting the cable compensation circuit of video signals3 When using the AW-RP400 controller $ Installing the pan/tilt head Safety wireStand-alone installation $ Mounting the cameraSuspended installation Stand-alone installation Mounting example when the camera side is heavyMounting example when the lens side is heavy Recommended lensesWith the AW-E350/AW-E650 OAttaching the chainWith the AW-E655/AW-E750/AW-E860 OAdjusting slack in the chain OMounting a cameraWith the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 Camera guide pin Camera mounting Screw Camera mounting Screw$ Connecting the connector panel with the controller AW-RP501 Connections$ Connecting the connector panel with the controller AW-RP505 Connections$ Connecting the connector panel with the controller AW-RP605A Connections$ Connecting the connector panel with the controller AW-RP400 Connections$ Connecting the connector panel RS-232C control The BNC connectors are not connected to the pan/tilt headConnections DC cable UL Type SPT-2 2!16$ Head connector panel 1ND/EXT connector4CAMERA I/F connector 2 LENS I/F connector5 1394 connector 6 CONTROL IN IP/RP connector7 Y OUT connector 8 Pr/SDI OUT connector9 Pb OUT connector G/L IN connectorVIDEO OUT connector CAMERA CONTROL IN connector$ Connecting the AC adapter for use with the pan/tilt head ConnectionsDC 12V IN terminal board ? LAMP CONTROL terminal board$ Connection examples ConnectionsColor monitor DC cableConnections Camera cable supplied Color monitor Coaxial cablemax. 1640 ft. 500 m 10BASE-TConnections Connections Connections Connections Connections Connections Coaxial cable Camera cable suppliedCoaxial cable BELDEN 8281, max.Color monitor 666 ft. 200 m Coaxial cable BELDEN 8281, max. 3333 ft. 1000 mConnections panel is used to control the cameraCable supplied with AW-CB400 DC cable UL Type SPT-2 2!16 AWG orConnections Connections Connections Connections Camera cable supplied Color monitor Coaxial cableRS-232C cable AW-CA28T9 AC adapterConnections Connections For further details, refer to the web card instructionsConnections For further details, refer to the IEEE1394 card instructionsLimiters $ Setting/releasing the limiters To release the settingTo release the setting To release the settingTo release the setting To release the settingTo release the setting To release the settingTo release the setting To release the settingTo release the setting To release the settingReplacement of consumable parts $ Replacing the battery$ Replacing the motor $ Replacing the gearSpecifications Power supplyPower consumption DC +12 Maximum load capacity 8.8 lb 4 kg Allowable operating temperature$ Functions/performance SpecificationsWeight Allowable operating humidityPage