Panasonic AW-PH360N manual OFor the controller AW-RP605A

Limiters

OFor the controller AW-RP605A

1.To set the upper limit position of the travel range:

Using the controller, tilt the camera to the position which is to serve as the upper limit.

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47 .

The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.

To release the setting:

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47 .

The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.

2.To set the lower limit position of the travel range:

Using the controller, tilt the camera to the position which is to serve as the lower limit.

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46 .

The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.

To release the setting:

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46 .

The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.

3.To set the left-most limit position of the travel range:

Using the controller, tilt the camera to the position which is to serve as the left- most limit.

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44 .

The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.

To release the setting:

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44 .

The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.

4.To set the right-most limit position of the travel range:

Using the controller, tilt the camera to the position which is to serve as the right-most limit.

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45 .

The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.

To release the setting:

While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45 .

The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.

- 45 -