Panasonic AW-PH360N manual Specifications

Specifications

	Power supply:	DC +12 V (connector)
	Power consumption: DC +12		V 3 A (camera power included),
		DC +12	V 1.3 A (pan/tilt head only)
1 indicates safety information.
Genlock input:		Black burst or composite video (BNC connector)

Camera video output: Video: 75 Ω (BNC connector)

Y:75 Ω (BNC connector)

Pr:	75	Ω (BNC connector) (Switchable to SDI)
Pb:	75	Ω (BNC connector)
SDI:	BNC connector (Switchable to Pr)

Camera / pan/tilt head control:

• Controller (AW-RP301/AW-RP305)

Pan/tilt head control: RS-422 (RJ-45, modular jack)

• Controller (AW-RP501/AW-RP505)

Pan/tilt head control: RS-422 (RJ-45, modular jack)

Camera control: Interactive serial communication (BNC connector)

• Controller (AW-RP605A)

Camera / Pan/tilt head control: RS-422 (RJ-45, modular jack)

• Controller (AW-RP400)

Camera / Pan/tilt head control: RS-485 (RJ-45, modular jack)

• Controller (Personal computer, etc.)

Camera / Pan/tilt head control: RS-232C (28 pin, half pitch connector)

Lamp control:	Control signals (connector)
Option control:	Control signals (connector)

Maximum cable length:

• Controller (AW-RP301/AW-RP305/AW-RP501/AW-RP505/AW-RP400)

500 m (with BELDEN 8281 coaxial cable, 10BASE-T straight cable equivalent to UTP category 5)

• Controller (AW-RP605A)

1000 m (with BELDEN 8281 coaxial cable, 10BASE-T straight cable equivalent to UTP category 5)

When the SDI signal is transmitted: 200 m with BELDEN 8281 coaxial cable

Maximum load capacity: 8.8 lb (4 kg)

Allowable operating temperature:

14°F to 113°F (–10°C to +45°C)

- 48 -