Connections

@When the unit is to be connected to a personal computer using the IEEE1394 cable, and the camera and pan/tilt head are to be controlled by the personal computer

Pan/tilt head cable

(AW-CA50E29)

IEEE1394 cable, max. 15 ft. (4.5 m)

DC cable

(UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)

Personal computer

(Windows)

AC adapter:

AW-PS300A

Use the pan/tilt head cable (AW-CA50E29) to connect the unit with the convertible camera containing the plugged-in IEEE1394 card.

Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the analog/IEEE1394 card.

Use the IEEE1394 cable to connect the unit with the personal computer (Windows).

Install the driver software and control software from the floppy disk supplied with the IEEE1394 card in the personal computer (Windows).

Check that the pan/tilt head and camera can be controlled by the personal computer (Windows) using the control software.

For further details, refer to the IEEE1394 card instructions.

- 42 -

Page 42
Image 42
Panasonic AW-PH360N manual AW-CA50E29