Panasonic AW-PH360N manual Parts and their functions, Tilting arm

Parts and their functions

1Tilting arm

This tilts in the vertical direction.

2Tilting arm fixing screws

M4!12 mm (4 screws supplied)

3Camera mounting plate

This is used to mount the convertible camera.

4Guide screws

These are used to maintain the camera’s balance and anchor the camera mounting plate.

5Guide pin

This determines the mounting direction of the camera.

6Guide roller

This serves as the fulcrum for maintaining the camera’s balance.

7Camera mounting screws (U1/4˝-20 UNC)

These are used to mount the camera and anchor it securely.

8Head

This rotates in the horizontal direction.

9Tally lamps (!2)

These light (red) in response to the selection signals.

:Head connector panel

This is used for connection with the camera and lens.

;Base

<Pan/tilt head mounting holes

These four holes are used for mounting the pan/tilt head.

=Safety wire mounting hole

This is used when attaching a wire to prevent the pan/tilt head from dropping.

>Base connector rear panel

This is used for connection with a controller, multi-port hub or AC adapter for the pan/tilt head.

?Base connector front panel

This is used for connection with a camera control or a personal computer.

- 8 -