Limiters
OFor the controller AW-RP400
1.To set the upper limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the upper limit.
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 15 
.
The setting is completed as soon as the lamp of the PRESET MEMORY button 45 comes on.
To release the setting:
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 15 
.
The setting is released when the lamp of the PRESET MEMORY button 50 comes on.
3.To set the
Using the controller, tilt the camera to the position which is to serve as the left- most limit.
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 5 
.
The setting is completed as soon as the lamp of the PRESET MEMORY button 45 comes on.
To release the setting:
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 5 
.
The setting is released when the lamp of the PRESET MEMORY button 50 comes on.
2.To set the lower limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the lower limit.
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 20 
.
The setting is completed as soon as the lamp of the PRESET MEMORY button 45 comes on.
To release the setting:
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 20 
.
The setting is released when the lamp of the PRESET MEMORY button 50 comes on.
4.To set the
Using the controller, tilt the camera to the position which is to serve as the
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 10 
.
The setting is completed as soon as the lamp of the PRESET MEMORY button 45 comes on.
To release the setting:
While holding down the MENU/LIMIT button on the controller, press PRESET MEMORY button 10 
.
The setting is released when the lamp of the PRESET MEMORY button 50 comes on.
- 46 -
