Panasonic DMC-LX2 operating instructions 108, Folder Composition

Connecting to other equipment

nFolder Composition

Folders appear as follows.

• Built-in	DCIM				100_PANA
memory		100_PANA			1
• Card				P1000001.JPG
			2		3
				P1000002.JPG
				P1000999.JPG
		101_PANA
		999_PANA
	MISC

PRIVATE1

1Folder number

2 File number

3 JPG : Pictures MOV : Motion pictures RAW : RAW format files

The contents of each folder are:

DCIM	100_PANA to 999_PANA
100_PANA to	Pictures/Motion pictures/
999_PANA	Pictures in RAW files
MISC	File with DPOF setting
PRIVATE1	Flip animation files

•This unit stores up to 999 picture files in each folder. A new folder is created after this maximum is reached.

•To reset file and folder numbers, use [NO.RESET] in the setup menu. (P24)

nConditions under which a different folder number is used

In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number.

•The folder containing the picture you just shot had a file numbered 999 in it (example: P1000999.JPG).

•When the card just recorded to contains, for example, a folder with the number 100 (100_PANA) in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with XXXXX being the name of the maker) and then a picture is recorded.

•You start shooting again after using [NO.RESET] in the setup menu (P24). (It is recorded to a new folder that has a number following on from the one previous. You can also reset the folder number to 100 by using [NO.RESET] immediately after formatting the card when there are no folders or pictures on the card.)

nConnection in the PTP mode Windows XP/Mac OS X users can establish connection in the PTP mode by setting the

camera in print mode [ ] and connecting it to their PC.

• You can only load pictures from the camera and cannot write them on the card or delete them.

• When there are 1000 or more pictures on a card, the pictures may not be imported.

• When you set the camera in print mode

[ ] and connect it to a PC, [PLEASE CONNECT TO THE PRINTER] appears on the camera’s LCD monitor. This is not a malfunction.

108

VQT0Y44