Panasonic DMC-LX2 operating instructions Taking Pictures using the Built-in Flash

Advanced

Taking Pictures using the Built-in Flash

	n Switching to the appropriate flash
	setting
n To open the flash	Set the flash setting of the built-in flash
Slide the [<OPEN] switch A.	according to the scene to be recorded.
A	1 Press q [<].
	FLASH
	AUTO
	AUTO/RED-EYE
	FORCED FLASH ON
	SLOW SYNC./RED-EYE
	SELECT	SET MENU

B 2

B: Photo flash

•Do not cover the photo flash with your fingers or any other items.

Press e/r or q [<] to switch the flash setting.

FLASH
AUTO
AUTO/RED-EYE
FORCED FLASH ON
SLOW SYNC./RED-EYE		or
SELECT	SET MENU

nTo close the flash Press the flash until it clicks.

•When 5 seconds pass without any operation, the setting selected at the time is automatically adopted.

•For the flash setting contents, refer to “Flash setting” (P44). For the selectable flash setting, refer to “Available flash settings by recording mode” (P44).

•To close the flash securely, press the center of the flash until it clicks. When you press on the edge, locking the flash may become difficult.

•Be sure to close the flash when not in use.

•The flash setting is fixed to Forced OFF [v] while the flash closes.

3 Press [MENU/SET].

•You can also press the shutter button halfway to finish.

•You can also use the joystick for performing steps 2 and 3.

To select To set

43

VQT0Y44