Panasonic DMC-LX2 operating instructions Troubleshooting, 122

Others

Troubleshooting

If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the setup menu. (P24)

nBattery and power supply

Conditions	Causes
The camera will not turn	Is the battery inserted correctly? Check the direction of the battery.
on.
	Is the battery sufficiently charged?
	Use a battery that has been sufficiently charged.
The picture is not	Is the power save mode (P23) or economy mode (P23) activated?
displayed on the LCD	Press the shutter button halfway to deactivate these modes.
monitor.
	Is the battery charge insufficient to operate the camera? Use
	a battery that has been sufficiently charged.
The camera turns off	• Is the battery charge insufficient to operate the camera? Use
soon after turning it on.	a battery that has been sufficiently charged.
	• If you leave the camera on, the battery will be exhausted.
	Turn the camera off frequently by using power save mode
	(P23) or economy mode (P23) etc.
n Shooting
Conditions	Causes
The picture cannot be	Is the mode dial correctly set?
recorded.
	Is there any memory capacity left on the built-in memory or
	the card?
	Before recording, delete some pictures. (P37)
The recorded pictures	Stains, such as fingerprints, may be on the lens. If the surface
are pale.	of the lens is dirty, clean it with a soft cloth.
There is dirt on the lens.
The recorded picture is	Check that the exposure is correctly compensated. (P48)
too bright or dark.
The subject is not	The focus range varies depending on the recording mode.
focused properly.	To set the proper mode for the distance to the subject, change
	the focus switch position or rotate the mode dial.
	Is the subject out of the focus range? (P29)
	Have you taken a picture with jitter?
Sometimes two or three	Is the camera set in auto bracket (P49) or burst mode (P51)?
pictures are taken with a single
press on the shutter button.
The recorded picture is	When taking a picture in shaded areas or indoors, the shutter
blurred. The optical	speed becomes slow and the Optical Image Stabilizer function
image stabilizer is not	may not work properly. In this case, we recommend holding the
effective.	camera with both hands firmly to take pictures (P28).
122

VQT0Y44