Panasonic DMC-LX2 Tips for taking good pictures, Direction detection function

Basic

•If the exposure is not adequate when the shutter button is pressed halfway, the aperture value and shutter speed turns red.

•When 10 or more seconds have passed after the Program shift becomes effective, the status to activate the Program shift is canceled and returned to the Program AE mode. However, the setting on the Program shift is memorized.

•The Program shift may not be activated depending on the brightness of the subject.

•The Program shift does not activate when the ISO sensitivity is set to [ISO ].

nTips for taking good pictures

•Hold the camera gently with both hands, keep arms stationary at your side and stand with your feet slightly apart.

•Be careful not to move the camera when you press the shutter button.

•Do not cover the microphone or the AF assist lamp with your finger or other objects.

•Do not cover the photo flash with your finger or other objects.

•Do not touch the lens part.

•If the LCD monitor screen is difficult to see because of light from the sun etc. shining on it, we recommend using your hand or another object to block the light when using the camera.

1 A 2

A

B

B

1 : When holding the camera sideways

2 : When holding the camera vertically

A : Photo flash

B : AF assist lamp

n Direction detection function

• If you take pictures by holding the camera vertically, the information of the rotation on the pictures are automatically added and recorded to the pictures.

When [ROTATE DISP.] (P97) is set to [ON], you can rotate and display pictures on the screen or the TV according to the information of the rotation on the pictures.

• This function may not work properly on pictures recorded by aiming the camera up or down.

• In motion picture mode [i] or [FLIP ANIM.], you cannot use the direction detection function.

28

VQT0Y44