Panasonic DMC-LX2 113, Card Size, Letter, When printing different pictures on 1 sheet of paper

Connecting to other equipment

2/2*

CARD SIZE	54 mm×85.6 mm
10×15cm	100 mm×150 mm
4″×6″	101.6 mm×152.4 mm
8″×10″	203.2 mm×254 mm
LETTER	216 mm×279.4 mm

*These items cannot be displayed when the printer does not support the paper sizes.

•[PAGE LAYOUT]

(Possible layouts on the camera)

FSettings on the printer are prioritized.

G1 page with no frame print

H1 page with frame print

I2 pages print

J4 pages print

•An item cannot be selected if the printer does not support the page layout.

nLayout printing

•When printing a picture several times on 1 sheet of paper

For example, if you want to print a picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [J] and then set the number of prints to 4 for the picture on [NUM. OF PRINTS].

•When printing different pictures on 1 sheet of paper

For example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE LAYOUT] to 4-picture printing [J] and then set [NUM. OF PRINTS] for the pictures to 1 in [MULTI SELECT] (P111).

•Do not disconnect the USB connection cable when the cable disconnection warning icon [K] is indicated. (Depending on the printer, the icon may not be displayed.)

•If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, press [MENU/SET] and stop printing at once. If not printing, disconnect the USB connection cable.

•The camera is receiving an error message from the printer when the [*] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.

•If the total number of ordered prints or the number of pictures set for print is large, printing is performed at intervals. In such cases, the number of remaining prints shown on the display will differ from the number of prints you set. The discrepancy, however, does not indicate an error.

•Date print, paper size and page layout settings on the printer may have priority over the same settings on the camera. Check these settings on the printer as well.

•When printing RAW format files, JPEG pictures associated with RAW format files will be printed.

When no associated JPEG picture exists, printing may not be possible.

•When printing did not go normally, turn the camera and the printer off and on.

•When the mode dial is set to a choice

other than print mode [ ], [USB MODE CHANGED. PLEASE REMOVE THE USB CABLE.] appears on the camera’s LCD

monitor. Set the mode dial back to [ ] before disconnecting the USB cable. Disconnect the cable after canceling printing.

113

VQT0Y44