Panasonic DMC-LX2 About the Built-in Memory/the Card, Icons displayed on the screen

Preparation

About the Built-in Memory/the Card

nBuilt-in Memory [ ]

You can record or play back pictures on the built-in memory when you are not using a card.

•The built-in memory capacity is about 13 MB.

•Picture size is fixed to QVGA (320×240 pixels) when recording motion pictures to the built-in memory. (P75)

nCard [ ]

You can record or play back pictures on a card.

(The built-in memory cannot be used when a card is inserted.)

nAccess to the built-in memory or the card

•The access indication (B or D) lights red when pictures are being recorded on the built-in memory (or the card).

•Do not do the following when the access indication lights, pictures are being read

or deleted or the built-in memory (or the card) is being formatted (P106).

–Turn the camera off.

–Remove the battery or the card (if used).

–Shake or impact the camera.

–Disconnect the AC adaptor (DMW-AC5;

optional). (when using the AC adaptor) The card or the data may be damaged and the camera may not operate normally.

Icons displayed on the screen:

A:

1 1 B:

C:

D:

A: When using the built-in memory

B: When accessing the built-in memory

C: When using the card

D: When accessing the card

•Picture data recorded on the built-in memory or a card can be copied from the built-in memory to the card or vice versa. (P105)

•The built-in memory (about 13 MB) can be used as a temporary storage device when the card being used becomes full.

•The access time for the built-in memory may be longer than the access time for a card. (Max. about 7 sec.)

17

VQT0Y44