Advanced

Taking Pictures with the Self-timer

1 Press w [].

SELFTIMER

OFF

10SEC. 2SEC.

SELECT

SET MENU

OFF : No display (canceled)

4: Self-timer set to 10 seconds

5: Self-timer set to 2 seconds

2 Press e/r or w [] to switch the self-timer mode.

A

119

B

CANCEL MENU

• The self-timer indicator

C

C blinks and the

 

shutter is activated after

 

10 seconds (or 2

 

seconds).

 

• If you press [MENU/

 

SET] when the self-timer is set, the self- timer setting is canceled.

SELFTIMER

OFF

10SEC.

2SEC.

or

SELECT

SET MENU

When 5 seconds pass without any operation, the setting selected at the time is automatically adopted.

3 Press [MENU/SET].

You can also press the shutter button halfway to finish.

You can also use the joystick for performing steps 2 and 3.

To select

To set

4 Press the shutter button halfway

Ato focus and then press it fully B to take a picture.

When using a tripod or in other cases, setting the self-timer to 2 seconds is a convenient way to stabilize the jitter caused by pressing the shutter button.

When you press the button fully with one stroke, the subject is automatically focused just before the recording. In dark places, the self-timer indicator blinks and then it may turn on brightly to work as the AF assist lamp (P90) for focusing on the subject.

When you set the self-timer in burst mode, the camera starts taking a picture 2 or 10 seconds after the shutter button is pressed. The number of pictures taken at one time is fixed to 3.

We recommend using a tripod when setting the self-timer. (When using a tripod, be sure to confirm that the tripod is stable when this unit is attached.)

The self-timer is fixed at 2 seconds when you are using [SELF PORTRAIT] in scene mode (P64).

47

VQT0Y44

Page 47
Image 47
Panasonic DMC-LX2 Taking Pictures with the Self-timer, Press w, Press e/r or w to switch the self-timer mode