Panasonic DMC-LX2 operating instructions Advanced

Advanced

•When the flash is activated or [STARRY SKY] in scene mode is selected, you can take only 1 picture.

•When the burst mode setting is set to Unlimited:

–You can take pictures until the capacity of the built-in memory or the card is full.

–The burst speed will become slower halfway. When the built-in memory is used, the burst speed becomes a maximum of 1 picture approximately every 6 seconds. However, the exact timing of this depends on the number of recordable pictures and the card.

•The focus is fixed in the first picture.

•The ways to control the exposure and the white balance vary depending on the burst mode setting. When the burst mode is set to [D], they are fixed to the values set for the first picture. When the burst speed is set to [E] or [F], they are adjusted each time you take a picture.

•When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.

•Burst mode is not canceled when the camera is switched off.

•When the burst mode is activated, the audio recording function cannot be used.

•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.

•In Burst mode, auto review is activated even the setting is off. (The picture is not enlarged.) You cannot change the auto review setting in the setup menu.

•You cannot use burst mode if you have set quality to [RAW].

52

VQT0Y44