Panasonic DMC-LX2 operating instructions SD Memory

Advanced

*You can only record to the built-in memory if the picture size is set to QVGA (320×240 pixels).

(: Available, —: Not available)

	SD Memory	Built-in
Item	Card/SDHC
		Memory
	Memory Card
30fpsVGA		—
10fpsVGA		—
30fpsQVGA
10fpsQVGA
30fps16:9L		—
10fps16:9L		—
15fps16:9H		—

4 Press [MENU/SET] to close the menu.

•You can also press the shutter button halfway to close the menu.

•You can also use the joystick to perform steps 2 to 4.

To select To set and to close

•The focus range is 50 cm (1.64 feet) [5 cm (0.16 feet) when using AF Macro/MF] to Z(Wide), 100 cm (3.28 feet) [30 cm (0.98 feet) when using AF Macro/MF] to Z(Tele).

•Refer to P131 for information about the available recording time.

•The remaining recordable time shown on the LCD may not reduce regularly.

•The motion pictures cannot be recorded without audio.

•This camera cannot take motion pictures if you are using a MultiMediaCard.

•When [PICT.MODE] is set to [30fpsVGA], [30fps16:9L] or [15fps16:9H], we recommend you to use cards offering “10

76

MB/s” or higher speeds (printed on their packages and elsewhere) for best results.

•Depending on the type of SD Memory Card or SDHC Memory Card, recording may stop in the middle.

•We recommend using Panasonic’s SD Memory Card/SDHC Memory Card.

•Depending on the type of card you are using, the card access indication may appear for a while after shooting motion pictures. This is normal.

•When motion pictures recorded with this camera are played back on other equipment, the quality of pictures and sounds may be deteriorated or it may not be possible to play them back. Also the recording information may not be displayed correctly.

•In motion picture mode [i], you cannot use the direction detection function and the review function.

•You cannot set [MODE2] on the Optical Image Stabilizer function.

•The bundled software includes QuickTime to play back motion picture files recorded with the camera on the PC.

VQT0Y44