Panasonic DMC-LX2 Taking Pictures using Burst Mode, Number of pictures recorded in burst mode

Advanced

Taking Pictures using Burst Mode

1 Press and hold the burst mode button until the burst menu is displayed.

BURST SHOOTING

OFF

H HIGH SPEED

L LOW SPEED

UNLIMITED

SELECT SET MENU

OFF: No display (canceled)

D: High speed

E: Low speed

F: Unlimited

2 Press e/r or the burst mode button to switch burst mode settings.

•When 5 seconds pass without any operation, the setting selected at the time is automatically adopted.

4 Take a picture.

•Hold down the shutter button fully to activate the burst mode.

nNumber of pictures recorded in burst mode

	Burst speed	Number of recordable
		pictures (pictures)
	(pictures/
	second)
			G		H
D	2*	max. 3		max. 5
E	1*	max. 3		max. 5
F		Depends on the
	approx. 1	remaining capacity of the
		built-in memory/card.

*The transfer speed of the card has no effect on the burst speed.

•The number of pictures indicated is when the shutter speed is faster than 1/60 and the flash is not activated.

•The burst speed (pictures/second) may become slower depending on brightness and other recording conditions.

3 Press [MENU/SET].

•You can also press the shutter button halfway to finish.

•You can also use the joystick to perform steps 2 and 3.

To select To set

51

VQT0Y44