Panasonic DMC-LX2 operating instructions Press w/q to select the picture and then press r to set

Basic

3 Press w/q to select the picture and then press r to set.

(Only when selecting [MULTI DELETE])

MULTI DELETE

7 8 9

10	11
SELECT	DELETE
MARK/UNMARK	EXIT MENU

•Repeat the above procedure.

•The selected pictures appear with [A]. When r is pressed again, the setting is canceled.

•The icon [c] blinks red if the selected picture cannot be deleted. Cancel the protect setting. (P100)

4Press [A].

5Press e to select [YES] and then press [MENU/SET] to set.

(Screen when selecting [MULTI DELETE])

MULTI DELETE

DELETE THE PICTURES

YOU MARKED?

YES

	NO			MENU
				SET
SELECT		SET	MENU

•[DELETE ALL PICTURES IN THE INTERNAL MEMORY ?] or [DELETE ALL PICTURES IN THE MEMORY CARD ?] is displayed when using [ALL DELETE], and

[DELETE ALL EXCEPT ?] is displayed when using [ALL DELETE EXCEPT ].

•When you delete all pictures, only pictures in either of the built-in memory or the card can be deleted. (You cannot delete pictures in both the built-in memory and the card at the same time.)

•If you press [MENU/SET] while deleting pictures using [ALL DELETE] or [ALL DELETE EXCEPT ], the deleting will stop halfway.

38

•Once deleted, pictures cannot be recovered. Please double-check before deleting pictures.

•Do not turn off the camera while deleting.

•When you delete pictures, use a battery with sufficient battery power (P14) or use with the AC adaptor (DMW-AC5; optional).

•It is possible to delete up to 50 pictures at one time using [MULTI DELETE].

•The more pictures there are to delete, the more time it takes.

•In the following cases, pictures are not deleted even if [ALL DELETE] or [ALL DELETE EXCEPT ] is selected.

–When the Write-protect switch of the SD Memory Card or SDHC Memory Card is set to the [LOCK] side (P18)

–When files do not conform to the DCF (P36)

–When pictures are protected [c] (P100)

•You can also use the joystick for these operations.

To select To set and to close

VQT0Y44