Panasonic DMC-LX2 Power LCD High Angle, Canceling High angle mode or Power LCD mode

Advanced

[		]:	The LCD monitor
			becomes brighter and
	POWER LCD
			easier to see even when
			taking pictures outdoors.
[	]:		The LCD monitor is easier
HIGH ANGLE			to see when taking
			pictures with the camera
			held high above your
			head. This is useful when
			you cannot get close to
			the subject because there
			is a person in the way.
			(However it becomes
			more difficult to see when
			looked at straight on.)

[OFF]	The LCD monitor returns
	to the normal brightness.

3 Press [MENU/SET].

•The [POWER LCD] or [HIGH ANGLE] icon appears.

119

B:

C:

B: POWER LCD

C: HIGH ANGLE

•You can also use the joystick to perform steps 2 and 3.

nCanceling High angle mode or Power LCD mode

•If you press and hold [DISPLAY/LCD MODE] again for 1 second the screen shown in step 2 is displayed. Select [OFF] to cancel Power LCD mode or High angle mode.

•High angle mode is also canceled if you turn the camera off or power save mode is activated.

•The brightness of the pictures displayed on the LCD monitor is adjusted when Power LCD mode or High angle mode is activated. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.

•You may not notice the High angle mode effect if the LCD monitor is difficult to see because of light from the sun etc. shining on it. In this case, we recommend using your hand or another object to block the light when using the camera.

•High angle mode is not activated in the following cases.

–In playback mode

–While the menu screen is displayed –While the review screen is displayed

To select To set

42

VQT0Y44