Panasonic DMC-LX2 operating instructions Taking Pictures using Auto Bracket

Advanced

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded by each press of the shutter button according to the compensation range of the exposure.

You can select the desired exposure among the 3 types of pictures.

1 Press e [C] several times until [BAUTO BRACKET] appears, set the compensation range of the exposure with w/q.

AUTO BRACKET

SELECT EXIT MENU

•You can select [OFF] (0), [±1/3 EV], [±2/3 EV] or [±1 EV].

•When you do not use auto bracket, select [OFF] (0).

2 Press [MENU/SET] to finish.

•You can also press the shutter button halfway to finish.

•When setting auto bracket, the auto bracket icon [B] appears on the screen.

•When taking pictures using auto bracket after the exposure compensation, the pictures are based on the compensated exposure. When the exposure is compensated, the exposure compensation value appears at bottom left of the screen.

•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.

•Auto review works if you activate auto bracket, irrespective of the auto review setting. (But the picture is not enlarged.) You cannot change the auto review setting in the setup menu.

•When setting auto bracket, you cannot use the audio recording function.

•The exposure may not be compensated with auto bracket depending on the brightness of the subject.

•You cannot use auto bracket if you have set quality to [RAW].

•In shutter-priority AE and manual exposure, if the shutter speed is set to more than 1 second auto bracket is disabled.

•When the flash is activated, you can take only 1 picture.

•You cannot use auto bracket when there are only one or two pictures remaining.

•You cannot use auto bracket in [SPORTS] (P63), [STARRY SKY] (P67) and [BABY1]/[BABY2] (P69) in scene mode.

•You cannot take pictures using auto bracket when the ISO sensitivity is set to [ ISO ].

49

VQT0Y44